ViewVC Help
View File | Revision Log | Show Annotations | Revision Graph | Root Listing
root/cebix/BasiliskII/README
(Generate patch)

Comparing BasiliskII/README (file contents):
Revision 1.5 by cebix, 1999-10-04T22:37:53Z vs.
Revision 1.20 by cebix, 2001-05-24T14:31:05Z

# Line 1 | Line 1
1  
2 <        Basilisk II, Version 0.7
3 <        A free, portable Mac II emulator
2 >  Basilisk II
3 >  A 68k Macintosh emulator
4  
5 <        Copyright (C) 1997-1999 Christian Bauer et al.
6 <        Freely distributable
5 >  Copyright (C) 1997-2001 Christian Bauer et al.
6  
7  
8   License
# Line 16 | Line 15 | See the file "COPYING" that is included
15   Overview
16   --------
17  
18 < Basilisk II is a free, portable, Open Source 68k Mac emulator. It requires
19 < a copy of a Mac ROM and a copy of MacOS to run. Basilisk II is freeware and
20 < distributed under the GNU General Public License.
18 > Basilisk II is an Open Source 68k Macintosh emulator. That is, it enables
19 > you to run 68k MacOS software on you computer, even if you are using a
20 > different operating system. However, you still need a copy of MacOS and
21 > a Macintosh ROM image to use Basilisk II.
22  
23   Basilisk II has currently been ported to the following systems:
24    - BeOS R4 (PowerPC and x86)
25 <  - Unix (tested under Linux, Solaris 2.5, FreeBSD 3.x and IRIX 6.5)
25 >  - Unix (tested under Linux, Solaris 2.5, FreeBSD 3.x, NetBSD 1.4.2 and
26 >    IRIX 6.5)
27    - AmigaOS 3.x
28    - Windows NT 4.0 (mostly works under Windows 95/98, too)
29  
# Line 35 | Line 36 | Some features of Basilisk II:
36    - Floppy disk driver (only 1.44MB disks supported)
37    - Driver for HFS partitions and hardfiles
38    - CD-ROM driver with basic audio functions
39 +  - Easy file exchange with the host OS via a "Host Directory Tree" icon
40 +    on the Mac desktop
41    - Ethernet driver
42    - Serial drivers
43    - SCSI Manager (old-style) emulation
44    - Emulates extended ADB keyboard and 3-button mouse
45 <  - Uses UAE 68k emulation or (under AmigaOS) real 68k processor
45 >  - Uses UAE 68k emulation or (under AmigaOS and NetBSD/m68k) real 68k
46 >    processor
47  
48   The emulator is not yet complete. See the file "TODO" for a list of
49   unimplemented stuff.
# Line 137 | Line 141 | cdrom <CD-ROM drive description>
141    installed CD-ROM drives. The format of the "CD-ROM drive description"
142    is the same as that of "disk" lines.
143  
144 + extfs <direcory path>
145 +
146 +  This item specifies the root directory for the "Host Directory Tree"
147 +  file system (the "Unix/BeOS/Amiga/..." icon on the Finder desktop).
148 +  All objects contained in that directory are accessible by Mac applications.
149 +  This feature is only available when File System Manager V1.2 or later
150 +  is installed on the Mac side. FSM 1.2 is built-in beginning with MacOS 7.6
151 +  and can be installed as a system extension (downloadable from Apple, look
152 +  for the FSM SDK in the developer section) for earlier MacOS versions.
153 +
154   scsi0 <SCSI target> ... scsi6 <SCSI target>
155  
156    These items describe the SCSI target to be used for a given Mac SCSI
# Line 198 | Line 212 | screen <video mode>
212          (8/15/24 bit) depends on the depth of the underlying X11 screen.
213          This is the default.
214        dga/<width>/<height>
215 <        Full-screen display using the X11 DGA extensions. The color depth
215 >        [if Basilisk II was configured with --enable-xf86-dga]
216 >        Full-screen display using the XFree86 DGA extension. The color depth
217          (8/15/24 bit) depends on the depth of the underlying X11 screen.
218          "width" and "height" specify the maximum width/height to use.
219 <        Saying "dga/0/0" means "complete screen". For DGA to work, Basilisk II
220 <        must be compiled with DGA support enabled (selectable in the configure
221 <        script).
219 >        Saying "dga/0/0" means "complete screen".
220 >      dga/<frame buffer name>
221 >        [if Basilisk II was configured with --enable-fbdev-dga]
222 >        Full-screen display using the frame buffer device /dev/fb. The color
223 >        depth (8/15/24 bit) depends on the depth of the underlying X11 screen.
224 >        The "frame buffer name" is looked up in the "fbdevices" file (whose
225 >        path can be specified with the "fbdevicefile" prefs item) to determine
226 >        certain characteristics of the device (doing a "ls -l /dev/fb" should
227 >        tell you what your frame buffer name is).
228  
229    AmigaOS:
230      The "video mode" is one of the following:
# Line 215 | Line 236 | screen <video mode>
236          15-bit truecolor display in a Picasso96 PIP. This requires
237          Picasso96 as well as a PIP-capable graphics card (e.g. Picasso IV).
238        scr/<hexadecimal mode ID>
239 <        8/15/24-bit fullscreen display on a Picasso96 screen with the given
240 <        mode ID. This requires Picasso96. For 15 and 24 bit, the frame buffer
241 <        format must be QuickDraw-compatible (big-endian, xRGB 1:5:5:5 or
242 <        xRGB 8:8:8:8). The screen size will be the default size for that
243 <        mode ID.
239 >        8/15/24-bit fullscreen display on a Picasso96/CyberGraphX screen with
240 >        the given mode ID. This requires Picasso96 or CyberGraphX. For 15 and
241 >        24 bit, the frame buffer format must be QuickDraw-compatible
242 >        (big-endian, xRGB 1:5:5:5 or xRGB 8:8:8:8). The screen size will be
243 >        the default size for that mode ID.
244  
245    Windows:
246      The "video mode" is one of the following:
# Line 306 | Line 327 | ether <ethernet card description>
327    BeOS:
328      It doesn't matter what you give as "ethernet card description", Basilisk II
329      will always use the first Ethernet card it finds as long an an "ether"
330 <    line exists (e.g. say "ether yes"). As Basilisk II requires the sheep_net
331 <    net server add-on from SheepShaver, you can only use Ethernet on PowerPC
332 <    machines.
330 >    line exists (e.g. say "ether yes"). Using Ethernet requires the "sheep_net"
331 >    Net Server add-on to be installed. The first time you start Basilisk II
332 >    with Ethernet enabled you will be asked whether it's OK to make the
333 >    necessary changes to your BeOS network configuration to enable sheep_net.
334  
335    Linux:
336      The "ethernet card description" is the name of an Ethernet interface.
337      There are two approaches to networking with Basilisk II:
338 +
339        1. Direct access to an Ethernet card via the "sheep_net" driver.
340           In this case, the "ethernet card description" must be the name
341           of a real Ethernet card, e.g. "eth0". It also requires the "sheep_net"
# Line 322 | Line 345 | ether <ethernet card description>
345           networking. MacOS will only be able to talk to other machines on
346           the Ethernet, but not to other networks that your Linux box routes
347           (e.g. a second Ethernet or a PPP connection to the Internet).
348 +
349        2. Putting Basilisk II on a virtual Ethernet via the "ethertap" device.
350           In this case, the "ethernet card description" must be the name
351           of an ethertap interface, e.g. "tap0". It also requires that you
352           configure your kernel to enable routing and the ethertap device:
353           under "Networking options", enable "Kernel/User netlink socket" and
354           "Netlink device emulation", under "Network device support", activate
355 <         "Ethertap network tap". Next, see /usr/src/linux/Documentation/
356 <         networking/ethertap.txt for information on how to set up /dev/tap*
357 <         device nodes and activate the ethertap interface. Under MacOS,
358 <         select an IP address that is on the virtual network and set the
359 <         default gateway to the IP address of the ethertap interface. This
360 <         approach will let you access all networks that your Linux box has
361 <         access to (especially, if your Linux box has a dial-up Internet
362 <         connection and is configured for IP masquerading, you can access
363 <         the Internet from MacOS). The drawback is that you can only use
364 <         network protocols that Linux can route, so you have to install and
365 <         configure netatalk if you want to use AppleTalk.
355 >         "Ethertap network tap". You also have to modify drivers/net/ethertap.c
356 >         a bit before compiling the new kernel:
357 >
358 >          - insert "#define CONFIG_ETHERTAP_MC 1" near the top (after the
359 >            #include lines)
360 >          - comment out the line "dev->flags|=IFF_NOARP;" in ethertap_probe()
361 >
362 >         Next, see /usr/src/linux/Documentation/networking/ethertap.txt for
363 >         information on how to set up /dev/tap* device nodes and activate the
364 >         ethertap interface. Under MacOS, select an IP address that is on the
365 >         virtual network and set the default gateway to the IP address of the
366 >         ethertap interface. This approach will let you access all networks
367 >         that your Linux box has access to (especially, if your Linux box has
368 >         a dial-up Internet connection and is configured for IP masquerading,
369 >         you can access the Internet from MacOS). The drawback is that you
370 >         can only use network protocols that Linux can route, so you have to
371 >         install and configure netatalk if you want to use AppleTalk. Here is
372 >         an example /etc/atalk/atalkd.conf for a LAN:
373 >
374 >           eth0 -seed -phase 2 -net 1 -addr 1.47 -zone "Ethernet"
375 >           tap0 -seed -phase 2 -net 2 -addr 2.47 -zone "Basilisknet"
376 >
377 >         (the "47" is an arbitrary node number). This will set up a zone
378 >         "Ethernet" (net 1) for the Ethernet and a zone "Basilisknet" (net 2)
379 >         for the internal network connection of the ethertap interface.
380 >         MacOS should automatically recognize the nets and zones upon startup.
381 >         If you are in an existing AppleTalk network, you should contact
382 >         your network administrator about the nets and zones you can use
383 >         (instead of the ones given in the example above).
384 >
385 >  FreeBSD:
386 >    The "ethertap" method described above also works under FreeBSD, but since
387 >    no-one has found the time to write a section for this manual, you're on
388 >    your own here...
389  
390    AmigaOS:
391      You have to specify the name of the SANA-II Ethernet device and the device
# Line 375 | Line 422 | frameskip <frames to skip>
422    For refreshed graphics modes (usually window modes), this specifies
423    how many frames to skip after drawing one frame. Higher values make
424    the video display more responsive but require more processing power.
425 <  The default is "8".
425 >  The default is "8". Under Unix/X11, a value of "0" selects a "dynamic"
426 >  update mode that cuts the display into rectangles and updates each
427 >  rectangle individually, depending on display changes.
428  
429   modelid <MacOS model ID>
430  
# Line 414 | Line 463 | System-specific configuration
463   Unix:
464  
465    keycodes <"true" or "false">
466 <  keycodefile <Keycode file path>
466 >  keycodefile <keycodes file path>
467  
468      By default, the X11 event handler in Basilisk II uses KeySyms to
469      translate keyboard event to Mac keycodes. While this method is very
# Line 425 | Line 474 | Unix:
474      not on the selected keymap. Unfortunately it depends on the X server
475      being used and possibly also on the type of keyboard attached. So
476      Basilisk II needs a table to translate X keycodes to Mac keycodes.
477 <    This table is read by default from /usr/local/lib/basilisk_ii_keycodes
477 >    This table is read by default from /usr/local/share/BasiliskII/keycodes
478      unless you specify a different file with the "keycodefile" item.
479 <    A sample keycode file ("basilisk_ii_keycodes") is included with
480 <    Basilisk II.
479 >    A sample keycode file is included with Basilisk II.
480 >
481 >  fbdevicefile <fbdevices file path>
482 >
483 >    This option specifies the file that contains frame buffer device
484 >    specifications for the fbdev-DGA video mode (when Basilisk II was
485 >    configured with --enable-fbdev-dga). The default location of the file
486 >    is /usr/local/share/BasiliskII/fbdevices. A sample file is included
487 >    with Basilisk II.
488 >
489 >  mousewheelmode <mode>
490 >
491 >    If you have a mouse with a wheel, this option specifies whether moving
492 >    the wheel will be reported to the MacOS as "Page up/down" (mode 0) or
493 >    "Cursor up/down" (mode 1) keys.
494 >
495 >  mousewheellines <number of lines>
496 >
497 >    If "mousewheelmode" is set to mode 1 (Cursor up/down), this option sets
498 >    the number of key events sent to MacOS for each wheel movement (the
499 >    number of lines to scroll).
500  
501   AmigaOS:
502  
# Line 440 | Line 508 | AmigaOS:
508  
509        ahi/<hexadecimal mode ID>
510  
511 +  scsimemtype <type>
512 +
513 +    This item controls the type of memory to use for SCSI buffers. Possible
514 +    values are:
515 +      0 Chip memory
516 +      1 24-bit DMA capable memory
517 +      2 Any memory
518 +
519 +    Be warned that many SCSI host adapters will not work with the "Any memory"
520 +    setting. Basilisk II has no way of knowing which memory type is supported
521 +    by the host adapter and setting an unsupported type will result in data
522 +    corruption.
523 +
524   Windows:
525  
526    noscsi <"true" or "false">
# Line 596 | Line 677 | Please see the included file "TECH" for
677   Acknowledgements
678   ----------------
679  
680 < Contributions by:
600 < - Bernd Schmidt <crux@pool.informatik.rwth-aachen.de>: UAE 68k emulation
601 < - Marc Hellwig <Marc.Hellwig@uni-mainz.de>: audio output, BeOS video code
602 <   and networking
603 < - Lauri Pesonen <lpesonen@nic.fi>: Windows NT port
680 > Contributions by (in alphabetical order):
681   - Orlando Bassotto <future@powercube.mediabit.net>: FreeBSD support
682 < - Brian J. Johnson <bjohnson@sgi.com>: IRIX support
682 > - Gwenole Beauchesne <gb@dial.oleane.com>: SPARC assembly optimizations and
683 >   fbdev video code
684   - Marc Chabanas <Marc.Chabanas@france.sun.com>: Solaris sound support
685 + - Marc Hellwig <Marc.Hellwig@uni-mainz.de>: audio output, BeOS video code
686 +   and networking
687   - Bill Huey <billh@mag.ucsd.edu>: 15/16 bit DGA and 15/16/32 bit X11
688     window support
689 + - Brian J. Johnson <bjohnson@sgi.com>: IRIX support
690 + - Jürgen Lachmann <juergen_lachmann@t-online.de>: AmigaOS CyberGraphX support
691 + - Samuel Lander <blair_sp@hotmail.com>: tile-based window refresh code
692   - David Lawrence <davidl@jlab.org>: incremental window refresh code
693 + - Lauri Pesonen <lpesonen@nic.fi>: Windows NT port
694 + - Bernd Schmidt <crux@pool.informatik.rwth-aachen.de>: UAE 68k emulation
695 + - and others...
696  
697   Special thanks to:
698   - Bernd Schmidt for letting me use his UAE 68k emulation

Diff Legend

Removed lines
+ Added lines
< Changed lines
> Changed lines