ViewVC Help
View File | Revision Log | Show Annotations | Revision Graph | Root Listing
root/cebix/BasiliskII/README
(Generate patch)

Comparing BasiliskII/README (file contents):
Revision 1.29 by gbeauche, 2002-05-20T17:50:39Z vs.
Revision 1.43 by nigel, 2005-12-29T13:06:12Z

# Line 2 | Line 2
2    Basilisk II
3    A 68k Macintosh emulator
4  
5 <  Copyright (C) 1997-2002 Christian Bauer et al.
5 >  Copyright (C) 1997-2005 Christian Bauer et al.
6  
7  
8   License
# Line 26 | Line 26 | Basilisk II has currently been ported to
26      IRIX 6.5)
27    - AmigaOS 3.x
28    - Windows NT 4.0 (mostly works under Windows 95/98, too)
29 <  - Mac OS X 10.1
29 >  - Mac OS X 10.1, 10.2, 10.3 (native windowing port has UI bugs with 10.4)
30  
31   Some features of Basilisk II:
32    - Emulates either a Mac Classic (which runs MacOS 0.x thru 7.5)
# Line 285 | Line 285 | screen <video mode>
285      application via Alt-Tab, Basilisk II is put in "snooze" mode (i.e. MacOS
286      is frozen).
287  
288
288    Mac OS X:
289      The "video mode" is one of the following:
290        win/<width>/<height>
291        win/<width>/<height>/<bits per pixel>
292 <        A refreshed (and buffered) [and very slow] Quartz window.
294 <        The default <bits> is 32, which is the only depth currently supported.
292 >        A refreshed (and buffered) Quartz window.
293        full/<width>/<height>
294        full/<width>/<height>/<bits per pixel>
295          A CGDirectDisplay full screen mode. <bits> can currently be 8, 16 or 32.
296          If not specified, the default is 32. There is currently no way to switch
297          between the Mac OS X and Basilisk II display, but Apple-Option-Escape
298          instantly and safely terminates the Basilisk II program.
301      opengl/<width>/<height>
302      opengl/<width>/<height>/<bits per pixel>
303        Currently unimplemented, will be a fast windowed mode.
304
299  
300   seriala <serial port description>
301  
# Line 368 | Line 362 | ether <ethernet card description>
362  
363    Linux:
364      The "ethernet card description" is the name of an Ethernet interface.
365 <    There are two approaches to networking with Basilisk II:
365 >    There are four approaches to networking with Basilisk II:
366  
367        1. Direct access to an Ethernet card via the "sheep_net" kernel module.
368           The "ethernet card description" must be the name of a real Ethernet
# Line 438 | Line 432 | ether <ethernet card description>
432           your network administrator about the nets and zones you can use
433           (instead of the ones given in the example above).
434  
435 +      3. Access the network through a "tuntap" interface.
436 +         The "ethernet card description" must be set to "tun".
437 +
438 +         TUN/TAP provides packet reception and transmission for user
439 +         space programs.  It can be viewed as a simple Point-to-Point
440 +         or Ethernet device, which instead of receiving packets from a
441 +         physical media, receives them from user space program and
442 +         instead of sending packets via physical media writes them to
443 +         the user space program.
444 +
445 +         Prerequesties:
446 +         - Make sure the "tun" kernel module is loaded
447 +           # modprobe tun
448 +         - Make sure IP Fordwarding is enabled on your system
449 +           # echo 1 >/proc/sys/net/ipv4/ip_forward
450 +
451 +         A virtual network configuration script is required and the
452 +         default is /usr/local/BasiliskII/tunconfig unless you specify
453 +         a different file with the "etherconfig" item.
454 +
455 +         This script requires you that "sudo" is properly configured
456 +         so that "/sbin/ifconfig" and "/sbin/iptables" can be executed
457 +         as root. Otherwise, you can still write a helper script which
458 +         invokes your favorite program to enhance a user priviledges.
459 +         e.g. in a KDE environment, kdesu can be used as follows:
460 +
461 +           #!/bin/sh
462 +           exec /usr/bin/kdesu -c /path/to/tunconfig $1 $2
463 +
464 +      4. Access the network through the user mode network stack.
465 +         (the code and this documentation come from QEMU)
466 +
467 +         By setting the "ethernet card description" to "slirp",
468 +         Basilisk II uses a completely user mode network stack (you
469 +         don't need root priviledges to use the virtual network). The
470 +         virtual network configuration is the following:
471 +
472 +           Basilisk II <------> Firewall/DHCP server <-----> Internet
473 +           (10.0.2.x)      |         (10.0.2.2)
474 +                           |
475 +                           ----> DNS server (10.0.2.3)
476 +                           |
477 +                           ----> SMB server (10.0.2.4)
478 +
479 +         Basilisk II behaves as if it was behind a firewall which
480 +         blocks all incoming connections. You can use a DHCP client to
481 +         automatically configure the network in Basilisk II.
482 +
483 +         In order to check that the user mode network is working, you
484 +         can ping the address 10.0.2.2 and verify that you got an
485 +         address in the range 10.0.2.x from the Basilisk II virtual
486 +         DHCP server.
487 +
488 +         Note that ping is not supported reliably to the internet as
489 +         it would require root priviledges. It means you can only ping
490 +         the local router (10.0.2.2).
491 +
492 +         When using the built-in TFTP server, the router is also the
493 +         TFTP server.
494 +
495    FreeBSD:
496      The "ethertap" method described above also works under FreeBSD, but since
497      no-one has found the time to write a section for this manual, you're on
# Line 450 | Line 504 | ether <ethernet card description>
504      not an Ethernet device, Basilisk II will display a warning message and
505      disable Ethernet networking.
506  
507 +  Mac OS X:
508 +    The "slirp" method described above now seems to work.
509 +
510    See the next item for an alternative way to do networking with Basilisk II.
511  
512   udptunnel <"true" or "false">
# Line 530 | Line 587 | nogui <"true" or "false">
587    error alerts. All errors will then be reported to stdout. The default
588    is "false".
589  
590 + keyboardtype <keyboard-id>
591 +
592 +  Specifies the keyboard type that BasiliskII should report to the MacOS.
593 +  The default is "5" which is a "Apple Extended Keyboard II (ISO)",
594 +  but many other numbers are understood by most versions of the MacOS
595 +  (e.g. 11 is a "Macintosh Plus Keyboard with keypad",
596 +        13 is a "Apple PowerBook Keyboard (ISO)" )
597 +
598   For additional information, consult the source.
599  
600  
# Line 578 | Line 643 | Unix:
643  
644      Set this to "true" to ignore illegal memory accesses. The default
645      is "false". This feature is only implemented on the following
646 <    platforms: Linux/x86, Linux/ppc, Darwin/ppc, FreeBSD/x86.
646 >    platforms: Linux/x86, Linux/ppc, Darwin/ppc.
647 >
648 >  dsp <device name>
649 >  mixer <device name>
650 >
651 >    Under Linux and FreeBSD, this specifies the devices to be used for sound
652 >    output and volume control, respectively. The defaults are "/dev/dsp" and
653 >    "/dev/mixer".
654  
655   AmigaOS:
656  
# Line 677 | Line 749 | Windows:
749      false.
750  
751  
752 + JIT-specific configuration
753 + --------------------------
754 +
755 + A Just-In-Time (JIT) translation engine is available for x86. This is
756 + aimed at translating 68040 instructions to native equivalent code
757 + sequences, thus providing faster emulation speeds.
758 +
759 +  jit <"true" or "false">
760 +
761 +    Set this to "true" to enable the JIT compiler. Default value is
762 +    "true" if the JIT compiler was compiled in. Besides, this is
763 +    effective only if Basilisk II is configured to emulate a 68040.
764 +
765 +  jitfpu <"true" or "false">
766 +
767 +    Set this to "true" to enable translation of floating-point (FPU)
768 +    instructions. Default is "true".
769 +
770 +  jitcachesize <size>
771 +
772 +    Allocate "size" kilobytes of RAM for the translation cache. The
773 +    value given will be rounded down to the nearest multiple of a page
774 +    size. Minimal value is "2048" (2MB). Default value is "8192" (8MB).
775 +
776 +  jitlazyflush <"true" or "false">
777 +
778 +    Set this to "true" to enable lazy invalidation of the translation
779 +    cache. This is always recommended as it usually makes the system
780 +    more responsive and faster, especially while running MacOS
781 +    8.X. Default value is "true".
782 +
783 +  jitdebug <"true" or "false">
784 +
785 +    Set this to "true" to enable the JIT debugger. This requires a
786 +    build of Basilisk II with the cxmon debugger. Default is "false".
787 +
788 +
789   Usage
790   -----
791  
# Line 777 | Line 886 | Acknowledgements
886   Contributions by (in alphabetical order):
887   - Orlando Bassotto <future@powercube.mediabit.net>: FreeBSD support
888   - Gwenolé Beauchesne <gb@dial.oleane.com>: SPARC assembly optimizations,
889 <   lots of work on the Unix video code
889 >   lots of work on the Unix video code, fixes and improvements to the
890 >   JIT compiler
891   - Marc Chabanas <Marc.Chabanas@france.sun.com>: Solaris sound support
892   - Marc Hellwig <Marc.Hellwig@uni-mainz.de>: audio output, BeOS video code
893     and networking
# Line 787 | Line 897 | Contributions by (in alphabetical order)
897   - Jürgen Lachmann <juergen_lachmann@t-online.de>: AmigaOS CyberGraphX support
898   - Samuel Lander <blair_sp@hotmail.com>: tile-based window refresh code
899   - David Lawrence <davidl@jlab.org>: incremental window refresh code
900 + - Bernie Meyer <bmeyer@csse.monash.edu.au>: original UAE-JIT code
901   - Nigel Pearson <nigel@ind.tansu.com.au>: Mac OS X port
902   - Lauri Pesonen <lpesonen@nic.fi>: Windows NT port
903   - Bernd Schmidt <crux@pool.informatik.rwth-aachen.de>: UAE 68k emulation
904 + - Michael Z. Sliczniak <msliczniak@comcast.net>: Mach memory fault recovery
905   - and others...
906  
907   Special thanks to:

Diff Legend

Removed lines
+ Added lines
< Changed lines
> Changed lines