[ViewVC] Diff of: cebix/SheepShaver/src/kpx_cpu/sheepshaver

Comparing SheepShaver/src/kpx_cpu/sheepshaver_glue.cpp (file contents):
Revision 1.11 by gbeauche, 2003-10-26T14:16:39Z vs.
Revision 1.53 by gbeauche, 2004-11-22T22:04:38Z

#	Line 1 \| Line 1
1		/*
2		* sheepshaver_glue.cpp - Glue Kheperix CPU to SheepShaver CPU engine interface
3		*
4	<	* SheepShaver (C) 1997-2002 Christian Bauer and Marc Hellwig
4	>	* SheepShaver (C) 1997-2004 Christian Bauer and Marc Hellwig
5		*
6		* This program is free software; you can redistribute it and/or modify
7		* it under the terms of the GNU General Public License as published by
#	Line 28 \| Line 28
28		#include "macos_util.h"
29		#include "block-alloc.hpp"
30		#include "sigsegv.h"
31	–	#include "spcflags.h"
31		#include "cpu/ppc/ppc-cpu.hpp"
32		#include "cpu/ppc/ppc-operations.hpp"
33	+	#include "cpu/ppc/ppc-instructions.hpp"
34	+	#include "thunks.h"
35
36		// Used for NativeOp trampolines
37		#include "video.h"
38		#include "name_registry.h"
39		#include "serial.h"
40	+	#include "ether.h"
41	+	#include "timer.h"
42
43		#include <stdio.h>
44	+	#include <stdlib.h>
45	+	#ifdef HAVE_MALLOC_H
46	+	#include <malloc.h>
47	+	#endif
48	+
49	+	#ifdef USE_SDL_VIDEO
50	+	#include <SDL_events.h>
51	+	#endif
52
53		#if ENABLE_MON
54		#include "mon.h"
#	Line 47 \| Line 58
58		#define DEBUG 0
59		#include "debug.h"
60
61	+	// Emulation time statistics
62	+	#ifndef EMUL_TIME_STATS
63	+	#define EMUL_TIME_STATS 0
64	+	#endif
65	+
66	+	#if EMUL_TIME_STATS
67	+	static clock_t emul_start_time;
68	+	static uint32 interrupt_count = 0, ppc_interrupt_count = 0;
69	+	static clock_t interrupt_time = 0;
70	+	static uint32 exec68k_count = 0;
71	+	static clock_t exec68k_time = 0;
72	+	static uint32 native_exec_count = 0;
73	+	static clock_t native_exec_time = 0;
74	+	static uint32 macos_exec_count = 0;
75	+	static clock_t macos_exec_time = 0;
76	+	#endif
77	+
78		static void enter_mon(void)
79		{
80		// Start up mon in real-mode
#	Line 56 \| Line 84 \| static void enter_mon(void)
84		#endif
85		}
86
87	<	// Enable multicore (main/interrupts) cpu emulation?
88	<	#define MULTICORE_CPU (ASYNC_IRQ ? 1 : 0)
87	>	// From main_*.cpp
88	>	extern uintptr SignalStackBase();
89	>
90	>	// From rsrc_patches.cpp
91	>	extern "C" void check_load_invoc(uint32 type, int16 id, uint32 h);
92	>
93	>	// PowerPC EmulOp to exit from emulation looop
94	>	const uint32 POWERPC_EXEC_RETURN = POWERPC_EMUL_OP \| 1;
95	>
96	>	// Enable interrupt routine safety checks?
97	>	#define SAFE_INTERRUPT_PPC 1
98
99		// Enable Execute68k() safety checks?
100		#define SAFE_EXEC_68K 1
#	Line 72 \| Line 109 \| static void enter_mon(void)
109		#define INTERRUPTS_IN_NATIVE_MODE 1
110
111		// Pointer to Kernel Data
112	<	static KernelData * const kernel_data = (KernelData *)KERNEL_DATA_BASE;
112	>	static KernelData * kernel_data;
113	>
114	>	// SIGSEGV handler
115	>	sigsegv_return_t sigsegv_handler(sigsegv_address_t, sigsegv_address_t);
116	>
117	>	#if PPC_ENABLE_JIT && PPC_REENTRANT_JIT
118	>	// Special trampolines for EmulOp and NativeOp
119	>	static uint8 *emul_op_trampoline;
120	>	static uint8 *native_op_trampoline;
121	>	#endif
122	>
123	>	// JIT Compiler enabled?
124	>	static inline bool enable_jit_p()
125	>	{
126	>	return PrefsFindBool("jit");
127	>	}
128
129
130		/**
131		* PowerPC emulator glue with special 'sheep' opcodes
132		**/
133
134	<	struct sheepshaver_exec_return { };
134	>	enum {
135	>	PPC_I(SHEEP) = PPC_I(MAX),
136	>	PPC_I(SHEEP_MAX)
137	>	};
138
139		class sheepshaver_cpu
140		: public powerpc_cpu
#	Line 87 \| Line 142 \| class sheepshaver_cpu
142		void init_decoder();
143		void execute_sheep(uint32 opcode);
144
145	+	// CPU context to preserve on interrupt
146	+	class interrupt_context {
147	+	uint32 gpr[32];
148	+	uint32 pc;
149	+	uint32 lr;
150	+	uint32 ctr;
151	+	uint32 cr;
152	+	uint32 xer;
153	+	sheepshaver_cpu *cpu;
154	+	const char *where;
155	+	public:
156	+	interrupt_context(sheepshaver_cpu _cpu, const char _where);
157	+	~interrupt_context();
158	+	};
159	+
160		public:
161
162		// Constructor
163		sheepshaver_cpu();
164
165	<	// Condition Register accessors
165	>	// CR & XER accessors
166		uint32 get_cr() const { return cr().get(); }
167		void set_cr(uint32 v) { cr().set(v); }
168	+	uint32 get_xer() const { return xer().get(); }
169	+	void set_xer(uint32 v) { xer().set(v); }
170	+
171	+	// Execute NATIVE_OP routine
172	+	void execute_native_op(uint32 native_op);
173
174	<	// Execution loop
175	<	void execute(uint32 entry, bool enable_cache = false);
174	>	// Execute EMUL_OP routine
175	>	void execute_emul_op(uint32 emul_op);
176
177		// Execute 68k routine
178		void execute_68k(uint32 entry, M68kRegisters *r);
#	Line 108 \| Line 183 \| public:
183		// Execute MacOS/PPC code
184		uint32 execute_macos_code(uint32 tvect, int nargs, uint32 const *args);
185
186	+	#if PPC_ENABLE_JIT
187	+	// Compile one instruction
188	+	virtual int compile1(codegen_context_t & cg_context);
189	+	#endif
190		// Resource manager thunk
191		void get_resource(uint32 old_get_resource);
192
#	Line 115 \| Line 194 \| public:
194		void interrupt(uint32 entry);
195		void handle_interrupt();
196
197	<	// spcflags for interrupts handling
198	<	static uint32 spcflags;
120	<
121	<	// Lazy memory allocator (one item at a time)
122	<	void *operator new(size_t size)
123	<	{ return allocator_helper< sheepshaver_cpu, lazy_allocator >::allocate(); }
124	<	void operator delete(void *p)
125	<	{ allocator_helper< sheepshaver_cpu, lazy_allocator >::deallocate(p); }
126	<	// FIXME: really make surre array allocation fail at link time?
127	<	void *operator new[](size_t);
128	<	void operator delete[](void *p);
197	>	// Make sure the SIGSEGV handler can access CPU registers
198	>	friend sigsegv_return_t sigsegv_handler(sigsegv_address_t, sigsegv_address_t);
199		};
200
201	<	uint32 sheepshaver_cpu::spcflags = 0;
202	<	lazy_allocator< sheepshaver_cpu > allocator_helper< sheepshaver_cpu, lazy_allocator >::allocator;
201	>	// Memory allocator returning areas aligned on 16-byte boundaries
202	>	void *operator new(size_t size)
203	>	{
204	>	void *p;
205	>
206	>	#if defined(HAVE_POSIX_MEMALIGN)
207	>	if (posix_memalign(&p, 16, size) != 0)
208	>	throw std::bad_alloc();
209	>	#elif defined(HAVE_MEMALIGN)
210	>	p = memalign(16, size);
211	>	#elif defined(HAVE_VALLOC)
212	>	p = valloc(size); // page-aligned!
213	>	#else
214	>	/* XXX: handle padding ourselves */
215	>	p = malloc(size);
216	>	#endif
217	>
218	>	return p;
219	>	}
220	>
221	>	void operator delete(void *p)
222	>	{
223	>	#if defined(HAVE_MEMALIGN) \|\| defined(HAVE_VALLOC)
224	>	#if defined(__GLIBC__)
225	>	// this is known to work only with GNU libc
226	>	free(p);
227	>	#endif
228	>	#else
229	>	free(p);
230	>	#endif
231	>	}
232
233		sheepshaver_cpu::sheepshaver_cpu()
234	<	: powerpc_cpu()
234	>	: powerpc_cpu(enable_jit_p())
235		{
236		init_decoder();
237		}
238
239		void sheepshaver_cpu::init_decoder()
240		{
142	–	#ifndef PPC_NO_STATIC_II_INDEX_TABLE
143	–	static bool initialized = false;
144	–	if (initialized)
145	–	return;
146	–	initialized = true;
147	–	#endif
148	–
241		static const instr_info_t sheep_ii_table[] = {
242		{ "sheep",
243	<	(execute_fn)&sheepshaver_cpu::execute_sheep,
243	>	(execute_pmf)&sheepshaver_cpu::execute_sheep,
244		NULL,
245	+	PPC_I(SHEEP),
246		D_form, 6, 0, CFLOW_JUMP \| CFLOW_TRAP
247		}
248		};
#	Line 163 \| Line 256 \| void sheepshaver_cpu::init_decoder()
256		}
257		}
258
166	–	// Forward declaration for native opcode handler
167	–	static void NativeOp(int selector);
168	–
259		/* NativeOp instruction format:
260	<	+------------+--------------------------+--+----------+------------+
261	<	\| 6 \| \|FN\| OP \| 2 \|
262	<	+------------+--------------------------+--+----------+------------+
263	<	0 5 \|6 19 20 21 25 26 31
260	>	+------------+-------------------------+--+-----------+------------+
261	>	\| 6 \| \|FN\| OP \| 2 \|
262	>	+------------+-------------------------+--+-----------+------------+
263	>	0 5 \|6 18 19 20 25 26 31
264		*/
265
266	<	typedef bit_field< 20, 20 > FN_field;
267	<	typedef bit_field< 21, 25 > NATIVE_OP_field;
266	>	typedef bit_field< 19, 19 > FN_field;
267	>	typedef bit_field< 20, 25 > NATIVE_OP_field;
268		typedef bit_field< 26, 31 > EMUL_OP_field;
269
270	+	// Execute EMUL_OP routine
271	+	void sheepshaver_cpu::execute_emul_op(uint32 emul_op)
272	+	{
273	+	M68kRegisters r68;
274	+	WriteMacInt32(XLM_68K_R25, gpr(25));
275	+	WriteMacInt32(XLM_RUN_MODE, MODE_EMUL_OP);
276	+	for (int i = 0; i < 8; i++)
277	+	r68.d[i] = gpr(8 + i);
278	+	for (int i = 0; i < 7; i++)
279	+	r68.a[i] = gpr(16 + i);
280	+	r68.a[7] = gpr(1);
281	+	uint32 saved_cr = get_cr() & CR_field<2>::mask();
282	+	uint32 saved_xer = get_xer();
283	+	EmulOp(&r68, gpr(24), emul_op);
284	+	set_cr(saved_cr);
285	+	set_xer(saved_xer);
286	+	for (int i = 0; i < 8; i++)
287	+	gpr(8 + i) = r68.d[i];
288	+	for (int i = 0; i < 7; i++)
289	+	gpr(16 + i) = r68.a[i];
290	+	gpr(1) = r68.a[7];
291	+	WriteMacInt32(XLM_RUN_MODE, MODE_68K);
292	+	}
293	+
294		// Execute SheepShaver instruction
295		void sheepshaver_cpu::execute_sheep(uint32 opcode)
296		{
#	Line 189 \| Line 303 \| void sheepshaver_cpu::execute_sheep(uint
303		break;
304
305		case 1: // EXEC_RETURN
306	<	throw sheepshaver_exec_return();
306	>	spcflags().set(SPCFLAG_CPU_EXEC_RETURN);
307		break;
308
309		case 2: // EXEC_NATIVE
310	<	NativeOp(NATIVE_OP_field::extract(opcode));
310	>	execute_native_op(NATIVE_OP_field::extract(opcode));
311		if (FN_field::test(opcode))
312		pc() = lr();
313		else
314		pc() += 4;
315		break;
316
317	<	default: { // EMUL_OP
318	<	M68kRegisters r68;
205	<	WriteMacInt32(XLM_68K_R25, gpr(25));
206	<	WriteMacInt32(XLM_RUN_MODE, MODE_EMUL_OP);
207	<	for (int i = 0; i < 8; i++)
208	<	r68.d[i] = gpr(8 + i);
209	<	for (int i = 0; i < 7; i++)
210	<	r68.a[i] = gpr(16 + i);
211	<	r68.a[7] = gpr(1);
212	<	EmulOp(&r68, gpr(24), EMUL_OP_field::extract(opcode) - 3);
213	<	for (int i = 0; i < 8; i++)
214	<	gpr(8 + i) = r68.d[i];
215	<	for (int i = 0; i < 7; i++)
216	<	gpr(16 + i) = r68.a[i];
217	<	gpr(1) = r68.a[7];
218	<	WriteMacInt32(XLM_RUN_MODE, MODE_68K);
317	>	default: // EMUL_OP
318	>	execute_emul_op(EMUL_OP_field::extract(opcode) - 3);
319		pc() += 4;
320		break;
321		}
222	–	}
322		}
323
324	<	// Execution loop
325	<	void sheepshaver_cpu::execute(uint32 entry, bool enable_cache)
326	<	{
327	<	try {
328	<	powerpc_cpu::execute(entry, enable_cache);
324	>	// Compile one instruction
325	>	#if PPC_ENABLE_JIT
326	>	int sheepshaver_cpu::compile1(codegen_context_t & cg_context)
327	>	{
328	>	const instr_info_t *ii = cg_context.instr_info;
329	>	if (ii->mnemo != PPC_I(SHEEP))
330	>	return COMPILE_FAILURE;
331	>
332	>	int status = COMPILE_FAILURE;
333	>	powerpc_dyngen & dg = cg_context.codegen;
334	>	uint32 opcode = cg_context.opcode;
335	>
336	>	switch (opcode & 0x3f) {
337	>	case 0: // EMUL_RETURN
338	>	dg.gen_invoke(QuitEmulator);
339	>	status = COMPILE_CODE_OK;
340	>	break;
341	>
342	>	case 1: // EXEC_RETURN
343	>	dg.gen_spcflags_set(SPCFLAG_CPU_EXEC_RETURN);
344	>	// Don't check for pending interrupts, we do know we have to
345	>	// get out of this block ASAP
346	>	dg.gen_exec_return();
347	>	status = COMPILE_EPILOGUE_OK;
348	>	break;
349	>
350	>	case 2: { // EXEC_NATIVE
351	>	uint32 selector = NATIVE_OP_field::extract(opcode);
352	>	switch (selector) {
353	>	#if !PPC_REENTRANT_JIT
354	>	// Filter out functions that may invoke Execute68k() or
355	>	// CallMacOS(), this would break reentrancy as they could
356	>	// invalidate the translation cache and even overwrite
357	>	// continuation code when we are done with them.
358	>	case NATIVE_PATCH_NAME_REGISTRY:
359	>	dg.gen_invoke(DoPatchNameRegistry);
360	>	status = COMPILE_CODE_OK;
361	>	break;
362	>	case NATIVE_VIDEO_INSTALL_ACCEL:
363	>	dg.gen_invoke(VideoInstallAccel);
364	>	status = COMPILE_CODE_OK;
365	>	break;
366	>	case NATIVE_VIDEO_VBL:
367	>	dg.gen_invoke(VideoVBL);
368	>	status = COMPILE_CODE_OK;
369	>	break;
370	>	case NATIVE_GET_RESOURCE:
371	>	case NATIVE_GET_1_RESOURCE:
372	>	case NATIVE_GET_IND_RESOURCE:
373	>	case NATIVE_GET_1_IND_RESOURCE:
374	>	case NATIVE_R_GET_RESOURCE: {
375	>	static const uint32 get_resource_ptr[] = {
376	>	XLM_GET_RESOURCE,
377	>	XLM_GET_1_RESOURCE,
378	>	XLM_GET_IND_RESOURCE,
379	>	XLM_GET_1_IND_RESOURCE,
380	>	XLM_R_GET_RESOURCE
381	>	};
382	>	uint32 old_get_resource = ReadMacInt32(get_resource_ptr[selector - NATIVE_GET_RESOURCE]);
383	>	typedef void (*func_t)(dyngen_cpu_base, uint32);
384	>	func_t func = (func_t)nv_mem_fun(&sheepshaver_cpu::get_resource).ptr();
385	>	dg.gen_invoke_CPU_im(func, old_get_resource);
386	>	status = COMPILE_CODE_OK;
387	>	break;
388	>	}
389	>	case NATIVE_CHECK_LOAD_INVOC:
390	>	dg.gen_load_T0_GPR(3);
391	>	dg.gen_load_T1_GPR(4);
392	>	dg.gen_se_16_32_T1();
393	>	dg.gen_load_T2_GPR(5);
394	>	dg.gen_invoke_T0_T1_T2((void (*)(uint32, uint32, uint32))check_load_invoc);
395	>	status = COMPILE_CODE_OK;
396	>	break;
397	>	#endif
398	>	case NATIVE_BITBLT:
399	>	dg.gen_load_T0_GPR(3);
400	>	dg.gen_invoke_T0((void (*)(uint32))NQD_bitblt);
401	>	status = COMPILE_CODE_OK;
402	>	break;
403	>	case NATIVE_INVRECT:
404	>	dg.gen_load_T0_GPR(3);
405	>	dg.gen_invoke_T0((void (*)(uint32))NQD_invrect);
406	>	status = COMPILE_CODE_OK;
407	>	break;
408	>	case NATIVE_FILLRECT:
409	>	dg.gen_load_T0_GPR(3);
410	>	dg.gen_invoke_T0((void (*)(uint32))NQD_fillrect);
411	>	status = COMPILE_CODE_OK;
412	>	break;
413	>	}
414	>	// Could we fully translate this NativeOp?
415	>	if (status == COMPILE_CODE_OK) {
416	>	if (!FN_field::test(opcode))
417	>	cg_context.done_compile = false;
418	>	else {
419	>	dg.gen_load_A0_LR();
420	>	dg.gen_set_PC_A0();
421	>	cg_context.done_compile = true;
422	>	}
423	>	break;
424	>	}
425	>	#if PPC_REENTRANT_JIT
426	>	// Try to execute NativeOp trampoline
427	>	if (!FN_field::test(opcode))
428	>	dg.gen_set_PC_im(cg_context.pc + 4);
429	>	else {
430	>	dg.gen_load_A0_LR();
431	>	dg.gen_set_PC_A0();
432	>	}
433	>	dg.gen_mov_32_T0_im(selector);
434	>	dg.gen_jmp(native_op_trampoline);
435	>	cg_context.done_compile = true;
436	>	status = COMPILE_EPILOGUE_OK;
437	>	break;
438	>	#endif
439	>	// Invoke NativeOp handler
440	>	if (!FN_field::test(opcode)) {
441	>	typedef void (*func_t)(dyngen_cpu_base, uint32);
442	>	func_t func = (func_t)nv_mem_fun(&sheepshaver_cpu::execute_native_op).ptr();
443	>	dg.gen_invoke_CPU_im(func, selector);
444	>	cg_context.done_compile = false;
445	>	status = COMPILE_CODE_OK;
446	>	}
447	>	// Otherwise, let it generate a call to execute_sheep() which
448	>	// will cause necessary updates to the program counter
449	>	break;
450		}
451	<	catch (sheepshaver_exec_return const &) {
452	<	// Nothing, simply return
451	>
452	>	default: { // EMUL_OP
453	>	uint32 emul_op = EMUL_OP_field::extract(opcode) - 3;
454	>	#if PPC_REENTRANT_JIT
455	>	// Try to execute EmulOp trampoline
456	>	dg.gen_set_PC_im(cg_context.pc + 4);
457	>	dg.gen_mov_32_T0_im(emul_op);
458	>	dg.gen_jmp(emul_op_trampoline);
459	>	cg_context.done_compile = true;
460	>	status = COMPILE_EPILOGUE_OK;
461	>	break;
462	>	#endif
463	>	// Invoke EmulOp handler
464	>	typedef void (*func_t)(dyngen_cpu_base, uint32);
465	>	func_t func = (func_t)nv_mem_fun(&sheepshaver_cpu::execute_emul_op).ptr();
466	>	dg.gen_invoke_CPU_im(func, emul_op);
467	>	cg_context.done_compile = false;
468	>	status = COMPILE_CODE_OK;
469	>	break;
470		}
234	–	catch (...) {
235	–	printf("ERROR: execute() received an unknown exception!\n");
236	–	QuitEmulator();
471		}
472	+	return status;
473	+	}
474	+	#endif
475	+
476	+	// CPU context to preserve on interrupt
477	+	sheepshaver_cpu::interrupt_context::interrupt_context(sheepshaver_cpu _cpu, const char _where)
478	+	{
479	+	#if SAFE_INTERRUPT_PPC >= 2
480	+	cpu = _cpu;
481	+	where = _where;
482	+
483	+	// Save interrupt context
484	+	memcpy(&gpr[0], &cpu->gpr(0), sizeof(gpr));
485	+	pc = cpu->pc();
486	+	lr = cpu->lr();
487	+	ctr = cpu->ctr();
488	+	cr = cpu->get_cr();
489	+	xer = cpu->get_xer();
490	+	#endif
491	+	}
492	+
493	+	sheepshaver_cpu::interrupt_context::~interrupt_context()
494	+	{
495	+	#if SAFE_INTERRUPT_PPC >= 2
496	+	// Check whether CPU context was preserved by interrupt
497	+	if (memcmp(&gpr[0], &cpu->gpr(0), sizeof(gpr)) != 0) {
498	+	printf("FATAL: %s: interrupt clobbers registers\n", where);
499	+	for (int i = 0; i < 32; i++)
500	+	if (gpr[i] != cpu->gpr(i))
501	+	printf(" r%d: %08x -> %08x\n", i, gpr[i], cpu->gpr(i));
502	+	}
503	+	if (pc != cpu->pc())
504	+	printf("FATAL: %s: interrupt clobbers PC\n", where);
505	+	if (lr != cpu->lr())
506	+	printf("FATAL: %s: interrupt clobbers LR\n", where);
507	+	if (ctr != cpu->ctr())
508	+	printf("FATAL: %s: interrupt clobbers CTR\n", where);
509	+	if (cr != cpu->get_cr())
510	+	printf("FATAL: %s: interrupt clobbers CR\n", where);
511	+	if (xer != cpu->get_xer())
512	+	printf("FATAL: %s: interrupt clobbers XER\n", where);
513	+	#endif
514		}
515
516		// Handle MacOS interrupt
517		void sheepshaver_cpu::interrupt(uint32 entry)
518		{
519	<	#if !MULTICORE_CPU
519	>	#if EMUL_TIME_STATS
520	>	ppc_interrupt_count++;
521	>	const clock_t interrupt_start = clock();
522	>	#endif
523	>
524	>	#if SAFE_INTERRUPT_PPC
525	>	static int depth = 0;
526	>	if (depth != 0)
527	>	printf("FATAL: sheepshaver_cpu::interrupt() called more than once: %d\n", depth);
528	>	depth++;
529	>	#endif
530	>
531		// Save program counters and branch registers
532		uint32 saved_pc = pc();
533		uint32 saved_lr = lr();
534		uint32 saved_ctr= ctr();
535		uint32 saved_sp = gpr(1);
249	–	#endif
536
537		// Initialize stack pointer to SheepShaver alternate stack base
538	<	gpr(1) = SheepStack1Base - 64;
538	>	gpr(1) = SignalStackBase() - 64;
539
540		// Build trampoline to return from interrupt
541	<	uint32 trampoline[] = { htonl(POWERPC_EMUL_OP \| 1) };
541	>	SheepVar32 trampoline = POWERPC_EXEC_RETURN;
542
543		// Prepare registers for nanokernel interrupt routine
544		kernel_data->v[0x004 >> 2] = htonl(gpr(1));
#	Line 271 \| Line 557 \| void sheepshaver_cpu::interrupt(uint32 e
557		gpr(1) = KernelDataAddr;
558		gpr(7) = ntohl(kernel_data->v[0x660 >> 2]);
559		gpr(8) = 0;
560	<	gpr(10) = (uint32)trampoline;
561	<	gpr(12) = (uint32)trampoline;
560	>	gpr(10) = trampoline.addr();
561	>	gpr(12) = trampoline.addr();
562		gpr(13) = get_cr();
563
564		// rlwimi. r7,r7,8,0,0
#	Line 286 \| Line 572 \| void sheepshaver_cpu::interrupt(uint32 e
572		// Enter nanokernel
573		execute(entry);
574
289	–	#if !MULTICORE_CPU
575		// Restore program counters and branch registers
576		pc() = saved_pc;
577		lr() = saved_lr;
578		ctr()= saved_ctr;
579		gpr(1) = saved_sp;
580	+
581	+	#if EMUL_TIME_STATS
582	+	interrupt_time += (clock() - interrupt_start);
583	+	#endif
584	+
585	+	#if SAFE_INTERRUPT_PPC
586	+	depth--;
587		#endif
588		}
589
590		// Execute 68k routine
591		void sheepshaver_cpu::execute_68k(uint32 entry, M68kRegisters *r)
592		{
593	+	#if EMUL_TIME_STATS
594	+	exec68k_count++;
595	+	const clock_t exec68k_start = clock();
596	+	#endif
597	+
598		#if SAFE_EXEC_68K
599		if (ReadMacInt32(XLM_RUN_MODE) != MODE_EMUL_OP)
600		printf("FATAL: Execute68k() not called from EMUL_OP mode\n");
#	Line 380 \| Line 677 \| void sheepshaver_cpu::execute_68k(uint32
677		lr() = saved_lr;
678		ctr()= saved_ctr;
679		set_cr(saved_cr);
680	+
681	+	#if EMUL_TIME_STATS
682	+	exec68k_time += (clock() - exec68k_start);
683	+	#endif
684		}
685
686		// Call MacOS PPC code
687		uint32 sheepshaver_cpu::execute_macos_code(uint32 tvect, int nargs, uint32 const *args)
688		{
689	+	#if EMUL_TIME_STATS
690	+	macos_exec_count++;
691	+	const clock_t macos_exec_start = clock();
692	+	#endif
693	+
694		// Save program counters and branch registers
695		uint32 saved_pc = pc();
696		uint32 saved_lr = lr();
697		uint32 saved_ctr= ctr();
698
699		// Build trampoline with EXEC_RETURN
700	<	uint32 trampoline[] = { htonl(POWERPC_EMUL_OP \| 1) };
701	<	lr() = (uint32)trampoline;
700	>	SheepVar32 trampoline = POWERPC_EXEC_RETURN;
701	>	lr() = trampoline.addr();
702
703		gpr(1) -= 64; // Create stack frame
704		uint32 proc = ReadMacInt32(tvect); // Get routine address
#	Line 423 \| Line 729 \| uint32 sheepshaver_cpu::execute_macos_co
729		lr() = saved_lr;
730		ctr()= saved_ctr;
731
732	+	#if EMUL_TIME_STATS
733	+	macos_exec_time += (clock() - macos_exec_start);
734	+	#endif
735	+
736		return retval;
737		}
738
#	Line 432 \| Line 742 \| inline void sheepshaver_cpu::execute_ppc
742		// Save branch registers
743		uint32 saved_lr = lr();
744
745	<	const uint32 trampoline[] = { htonl(POWERPC_EMUL_OP \| 1) };
746	<	lr() = (uint32)trampoline;
745	>	SheepVar32 trampoline = POWERPC_EXEC_RETURN;
746	>	WriteMacInt32(trampoline.addr(), POWERPC_EXEC_RETURN);
747	>	lr() = trampoline.addr();
748
749		execute(entry);
750
#	Line 442 \| Line 753 \| inline void sheepshaver_cpu::execute_ppc
753		}
754
755		// Resource Manager thunk
445	–	extern "C" void check_load_invoc(uint32 type, int16 id, uint32 h);
446	–
756		inline void sheepshaver_cpu::get_resource(uint32 old_get_resource)
757		{
758		uint32 type = gpr(3);
#	Line 469 \| Line 778 \| inline void sheepshaver_cpu::get_resourc
778		* SheepShaver CPU engine interface
779		**/
780
781	<	static sheepshaver_cpu *main_cpu = NULL; // CPU emulator to handle usual control flow
782	<	static sheepshaver_cpu *interrupt_cpu = NULL; // CPU emulator to handle interrupts
474	<	static sheepshaver_cpu *current_cpu = NULL; // Current CPU emulator context
781	>	// PowerPC CPU emulator
782	>	static sheepshaver_cpu *ppc_cpu = NULL;
783
784		void FlushCodeCache(uintptr start, uintptr end)
785		{
786		D(bug("FlushCodeCache(%08x, %08x)\n", start, end));
787	<	main_cpu->invalidate_cache_range(start, end);
480	<	#if MULTICORE_CPU
481	<	interrupt_cpu->invalidate_cache_range(start, end);
482	<	#endif
483	<	}
484	<
485	<	static inline void cpu_push(sheepshaver_cpu *new_cpu)
486	<	{
487	<	#if MULTICORE_CPU
488	<	current_cpu = new_cpu;
489	<	#endif
490	<	}
491	<
492	<	static inline void cpu_pop()
493	<	{
494	<	#if MULTICORE_CPU
495	<	current_cpu = main_cpu;
496	<	#endif
787	>	ppc_cpu->invalidate_cache_range(start, end);
788		}
789
790		// Dump PPC registers
791		static void dump_registers(void)
792		{
793	<	current_cpu->dump_registers();
793	>	ppc_cpu->dump_registers();
794		}
795
796		// Dump log
797		static void dump_log(void)
798		{
799	<	current_cpu->dump_log();
799	>	ppc_cpu->dump_log();
800		}
801
802		/*
803		* Initialize CPU emulation
804		*/
805
806	<	static sigsegv_return_t sigsegv_handler(sigsegv_address_t fault_address, sigsegv_address_t fault_instruction)
806	>	sigsegv_return_t sigsegv_handler(sigsegv_address_t fault_address, sigsegv_address_t fault_instruction)
807		{
808		#if ENABLE_VOSF
809		// Handle screen fault
#	Line 524 \| Line 815 \| static sigsegv_return_t sigsegv_handler(
815		const uintptr addr = (uintptr)fault_address;
816		#if HAVE_SIGSEGV_SKIP_INSTRUCTION
817		// Ignore writes to ROM
818	<	if ((addr - ROM_BASE) < ROM_SIZE)
818	>	if ((addr - (uintptr)ROMBaseHost) < ROM_SIZE)
819		return SIGSEGV_RETURN_SKIP_INSTRUCTION;
820
821	<	// Ignore all other faults, if requested
822	<	if (PrefsFindBool("ignoresegv"))
823	<	return SIGSEGV_RETURN_FAILURE;
821	>	// Get program counter of target CPU
822	>	sheepshaver_cpu * const cpu = ppc_cpu;
823	>	const uint32 pc = cpu->pc();
824	>
825	>	// Fault in Mac ROM or RAM?
826	>	bool mac_fault = (pc >= ROM_BASE) && (pc < (ROM_BASE + ROM_AREA_SIZE)) \|\| (pc >= RAMBase) && (pc < (RAMBase + RAMSize)) \|\| (pc >= DR_CACHE_BASE && pc < (DR_CACHE_BASE + DR_CACHE_SIZE));
827	>	if (mac_fault) {
828	>
829	>	// "VM settings" during MacOS 8 installation
830	>	if (pc == ROM_BASE + 0x488160 && cpu->gpr(20) == 0xf8000000)
831	>	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
832	>
833	>	// MacOS 8.5 installation
834	>	else if (pc == ROM_BASE + 0x488140 && cpu->gpr(16) == 0xf8000000)
835	>	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
836	>
837	>	// MacOS 8 serial drivers on startup
838	>	else if (pc == ROM_BASE + 0x48e080 && (cpu->gpr(8) == 0xf3012002 \|\| cpu->gpr(8) == 0xf3012000))
839	>	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
840	>
841	>	// MacOS 8.1 serial drivers on startup
842	>	else if (pc == ROM_BASE + 0x48c5e0 && (cpu->gpr(20) == 0xf3012002 \|\| cpu->gpr(20) == 0xf3012000))
843	>	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
844	>	else if (pc == ROM_BASE + 0x4a10a0 && (cpu->gpr(20) == 0xf3012002 \|\| cpu->gpr(20) == 0xf3012000))
845	>	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
846	>
847	>	// MacOS 8.6 serial drivers on startup (with DR Cache and OldWorld ROM)
848	>	else if ((pc - DR_CACHE_BASE) < DR_CACHE_SIZE && (cpu->gpr(16) == 0xf3012002 \|\| cpu->gpr(16) == 0xf3012000))
849	>	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
850	>	else if ((pc - DR_CACHE_BASE) < DR_CACHE_SIZE && (cpu->gpr(20) == 0xf3012002 \|\| cpu->gpr(20) == 0xf3012000))
851	>	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
852	>
853	>	// Ignore writes to the zero page
854	>	else if ((uint32)(addr - SheepMem::ZeroPage()) < (uint32)SheepMem::PageSize())
855	>	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
856	>
857	>	// Ignore all other faults, if requested
858	>	if (PrefsFindBool("ignoresegv"))
859	>	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
860	>	}
861		#else
862		#error "FIXME: You don't have the capability to skip instruction within signal handlers"
863		#endif
#	Line 537 \| Line 865 \| static sigsegv_return_t sigsegv_handler(
865		printf("SIGSEGV\n");
866		printf(" pc %p\n", fault_instruction);
867		printf(" ea %p\n", fault_address);
540	–	printf(" cpu %s\n", current_cpu == main_cpu ? "main" : "interrupts");
868		dump_registers();
869	<	current_cpu->dump_log();
869	>	ppc_cpu->dump_log();
870		enter_mon();
871		QuitEmulator();
872
#	Line 548 \| Line 875 \| static sigsegv_return_t sigsegv_handler(
875
876		void init_emul_ppc(void)
877		{
878	+	// Get pointer to KernelData in host address space
879	+	kernel_data = (KernelData *)Mac2HostAddr(KERNEL_DATA_BASE);
880	+
881		// Initialize main CPU emulator
882	<	main_cpu = new sheepshaver_cpu();
883	<	main_cpu->set_register(powerpc_registers::GPR(3), any_register((uint32)ROM_BASE + 0x30d000));
882	>	ppc_cpu = new sheepshaver_cpu();
883	>	ppc_cpu->set_register(powerpc_registers::GPR(3), any_register((uint32)ROM_BASE + 0x30d000));
884	>	ppc_cpu->set_register(powerpc_registers::GPR(4), any_register(KernelDataAddr + 0x1000));
885		WriteMacInt32(XLM_RUN_MODE, MODE_68K);
886
556	–	#if MULTICORE_CPU
557	–	// Initialize alternate CPU emulator to handle interrupts
558	–	interrupt_cpu = new sheepshaver_cpu();
559	–	#endif
560	–
561	–	// Install the handler for SIGSEGV
562	–	sigsegv_install_handler(sigsegv_handler);
563	–
887		#if ENABLE_MON
888		// Install "regs" command in cxmon
889		mon_add_command("regs", dump_registers, "regs Dump PowerPC registers\n");
890		mon_add_command("log", dump_log, "log Dump PowerPC emulation log\n");
891		#endif
892	+
893	+	#if EMUL_TIME_STATS
894	+	emul_start_time = clock();
895	+	#endif
896	+	}
897	+
898	+	/*
899	+	* Deinitialize emulation
900	+	*/
901	+
902	+	void exit_emul_ppc(void)
903	+	{
904	+	#if EMUL_TIME_STATS
905	+	clock_t emul_end_time = clock();
906	+
907	+	printf("### Statistics for SheepShaver emulation parts\n");
908	+	const clock_t emul_time = emul_end_time - emul_start_time;
909	+	printf("Total emulation time : %.1f sec\n", double(emul_time) / double(CLOCKS_PER_SEC));
910	+	printf("Total interrupt count: %d (%2.1f Hz)\n", interrupt_count,
911	+	(double(interrupt_count) * CLOCKS_PER_SEC) / double(emul_time));
912	+	printf("Total ppc interrupt count: %d (%2.1f %%)\n", ppc_interrupt_count,
913	+	(double(ppc_interrupt_count) * 100.0) / double(interrupt_count));
914	+
915	+	#define PRINT_STATS(LABEL, VAR_PREFIX) do { \
916	+	printf("Total " LABEL " count : %d\n", VAR_PREFIX##_count); \
917	+	printf("Total " LABEL " time : %.1f sec (%.1f%%)\n", \
918	+	double(VAR_PREFIX##_time) / double(CLOCKS_PER_SEC), \
919	+	100.0 * double(VAR_PREFIX##_time) / double(emul_time)); \
920	+	} while (0)
921	+
922	+	PRINT_STATS("Execute68k[Trap] execution", exec68k);
923	+	PRINT_STATS("NativeOp execution", native_exec);
924	+	PRINT_STATS("MacOS routine execution", macos_exec);
925	+
926	+	#undef PRINT_STATS
927	+	printf("\n");
928	+	#endif
929	+
930	+	delete ppc_cpu;
931	+	}
932	+
933	+	#if PPC_ENABLE_JIT && PPC_REENTRANT_JIT
934	+	// Initialize EmulOp trampolines
935	+	void init_emul_op_trampolines(basic_dyngen & dg)
936	+	{
937	+	typedef void (*func_t)(dyngen_cpu_base, uint32);
938	+	func_t func;
939	+
940	+	// EmulOp
941	+	emul_op_trampoline = dg.gen_start();
942	+	func = (func_t)nv_mem_fun(&sheepshaver_cpu::execute_emul_op).ptr();
943	+	dg.gen_invoke_CPU_T0(func);
944	+	dg.gen_exec_return();
945	+	dg.gen_end();
946	+
947	+	// NativeOp
948	+	native_op_trampoline = dg.gen_start();
949	+	func = (func_t)nv_mem_fun(&sheepshaver_cpu::execute_native_op).ptr();
950	+	dg.gen_invoke_CPU_T0(func);
951	+	dg.gen_exec_return();
952	+	dg.gen_end();
953	+
954	+	D(bug("EmulOp trampoline: %p\n", emul_op_trampoline));
955	+	D(bug("NativeOp trampoline: %p\n", native_op_trampoline));
956		}
957	+	#endif
958
959		/*
960		* Emulation loop
#	Line 574 \| Line 962 \| void init_emul_ppc(void)
962
963		void emul_ppc(uint32 entry)
964		{
965	<	current_cpu = main_cpu;
966	<	#if DEBUG
579	<	current_cpu->start_log();
965	>	#if 0
966	>	ppc_cpu->start_log();
967		#endif
968		// start emulation loop and enable code translation or caching
969	<	current_cpu->execute(entry, true);
969	>	ppc_cpu->execute(entry);
970		}
971
972		/*
973		* Handle PowerPC interrupt
974		*/
975
589	–	#if ASYNC_IRQ
590	–	void HandleInterrupt(void)
591	–	{
592	–	main_cpu->handle_interrupt();
593	–	}
594	–	#else
976		void TriggerInterrupt(void)
977		{
978		#if 0
979		WriteMacInt32(0x16a, ReadMacInt32(0x16a) + 1);
980		#else
981		// Trigger interrupt to main cpu only
982	<	if (main_cpu)
983	<	main_cpu->trigger_interrupt();
982	>	if (ppc_cpu)
983	>	ppc_cpu->trigger_interrupt();
984		#endif
985		}
605	–	#endif
986
987		void sheepshaver_cpu::handle_interrupt(void)
988		{
989	+	#ifdef USE_SDL_VIDEO
990	+	// We must fill in the events queue in the same thread that did call SDL_SetVideoMode()
991	+	SDL_PumpEvents();
992	+	#endif
993	+
994		// Do nothing if interrupts are disabled
995		if (int32(ReadMacInt32(XLM_IRQ_NEST)) > 0)
996		return;
997
998	<	// Do nothing if there is no interrupt pending
999	<	if (InterruptFlags == 0)
1000	<	return;
998	>	// Current interrupt nest level
999	>	static int interrupt_depth = 0;
1000	>	++interrupt_depth;
1001	>	#if EMUL_TIME_STATS
1002	>	interrupt_count++;
1003	>	#endif
1004
1005		// Disable MacOS stack sniffer
1006		WriteMacInt32(0x110, 0);
#	Line 621 \| Line 1009 \| void sheepshaver_cpu::handle_interrupt(v
1009		switch (ReadMacInt32(XLM_RUN_MODE)) {
1010		case MODE_68K:
1011		// 68k emulator active, trigger 68k interrupt level 1
624	–	assert(current_cpu == main_cpu);
1012		WriteMacInt16(tswap32(kernel_data->v[0x67c >> 2]), 1);
1013		set_cr(get_cr() \| tswap32(kernel_data->v[0x674 >> 2]));
1014		break;
#	Line 629 \| Line 1016 \| void sheepshaver_cpu::handle_interrupt(v
1016		#if INTERRUPTS_IN_NATIVE_MODE
1017		case MODE_NATIVE:
1018		// 68k emulator inactive, in nanokernel?
1019	<	assert(current_cpu == main_cpu);
1020	<	if (gpr(1) != KernelDataAddr) {
1019	>	if (gpr(1) != KernelDataAddr && interrupt_depth == 1) {
1020	>	interrupt_context ctx(this, "PowerPC mode");
1021	>
1022		// Prepare for 68k interrupt level 1
1023		WriteMacInt16(tswap32(kernel_data->v[0x67c >> 2]), 1);
1024		WriteMacInt32(tswap32(kernel_data->v[0x658 >> 2]) + 0xdc,
#	Line 639 \| Line 1027 \| void sheepshaver_cpu::handle_interrupt(v
1027
1028		// Execute nanokernel interrupt routine (this will activate the 68k emulator)
1029		DisableInterrupt();
642	–	cpu_push(interrupt_cpu);
1030		if (ROMType == ROMTYPE_NEWWORLD)
1031	<	current_cpu->interrupt(ROM_BASE + 0x312b1c);
1031	>	ppc_cpu->interrupt(ROM_BASE + 0x312b1c);
1032		else
1033	<	current_cpu->interrupt(ROM_BASE + 0x312a3c);
647	<	cpu_pop();
1033	>	ppc_cpu->interrupt(ROM_BASE + 0x312a3c);
1034		}
1035		break;
1036		#endif
#	Line 653 \| Line 1039 \| void sheepshaver_cpu::handle_interrupt(v
1039		case MODE_EMUL_OP:
1040		// 68k emulator active, within EMUL_OP routine, execute 68k interrupt routine directly when interrupt level is 0
1041		if ((ReadMacInt32(XLM_68K_R25) & 7) == 0) {
1042	+	interrupt_context ctx(this, "68k mode");
1043	+	#if EMUL_TIME_STATS
1044	+	const clock_t interrupt_start = clock();
1045	+	#endif
1046		#if 1
1047		// Execute full 68k interrupt routine
1048		M68kRegisters r;
1049		uint32 old_r25 = ReadMacInt32(XLM_68K_R25); // Save interrupt level
1050		WriteMacInt32(XLM_68K_R25, 0x21); // Execute with interrupt level 1
1051	<	static const uint8 proc[] = {
1051	>	static const uint8 proc_template[] = {
1052		0x3f, 0x3c, 0x00, 0x00, // move.w #$0000,-(sp) (fake format word)
1053		0x48, 0x7a, 0x00, 0x0a, // pea @1(pc) (return address)
1054		0x40, 0xe7, // move sr,-(sp) (saved SR)
#	Line 666 \| Line 1056 \| void sheepshaver_cpu::handle_interrupt(v
1056		0x4e, 0xd0, // jmp (a0)
1057		M68K_RTS >> 8, M68K_RTS & 0xff // @1
1058		};
1059	<	Execute68k((uint32)proc, &r);
1059	>	BUILD_SHEEPSHAVER_PROCEDURE(proc);
1060	>	Execute68k(proc, &r);
1061		WriteMacInt32(XLM_68K_R25, old_r25); // Restore interrupt level
1062		#else
1063		// Only update cursor
#	Line 674 \| Line 1065 \| void sheepshaver_cpu::handle_interrupt(v
1065		if (InterruptFlags & INTFLAG_VIA) {
1066		ClearInterruptFlag(INTFLAG_VIA);
1067		ADBInterrupt();
1068	<	ExecutePPC(VideoVBL);
1068	>	ExecuteNative(NATIVE_VIDEO_VBL);
1069		}
1070		}
1071		#endif
1072	+	#if EMUL_TIME_STATS
1073	+	interrupt_time += (clock() - interrupt_start);
1074	+	#endif
1075		}
1076		break;
1077		#endif
1078		}
685	–	}
1079
1080	<	/*
1081	<	* Execute NATIVE_OP opcode (called by PowerPC emulator)
1082	<	*/
690	<
691	<	#define POWERPC_NATIVE_OP_INIT(LR, OP) \
692	<	tswap32(POWERPC_EMUL_OP \| ((LR) << 11) \| (((uint32)OP) << 6) \| 2)
693	<
694	<	// FIXME: Make sure 32-bit relocations are used
695	<	const uint32 NativeOpTable[NATIVE_OP_MAX] = {
696	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_PATCH_NAME_REGISTRY),
697	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_VIDEO_INSTALL_ACCEL),
698	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_VIDEO_VBL),
699	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_VIDEO_DO_DRIVER_IO),
700	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_IRQ),
701	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_INIT),
702	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_TERM),
703	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_OPEN),
704	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_CLOSE),
705	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_WPUT),
706	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_RSRV),
707	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_NOTHING),
708	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_OPEN),
709	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_PRIME_IN),
710	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_PRIME_OUT),
711	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_CONTROL),
712	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_STATUS),
713	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_CLOSE),
714	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_GET_RESOURCE),
715	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_GET_1_RESOURCE),
716	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_GET_IND_RESOURCE),
717	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_GET_1_IND_RESOURCE),
718	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_R_GET_RESOURCE),
719	<	POWERPC_NATIVE_OP_INIT(0, NATIVE_DISABLE_INTERRUPT),
720	<	POWERPC_NATIVE_OP_INIT(0, NATIVE_ENABLE_INTERRUPT),
721	<	POWERPC_NATIVE_OP_INIT(1, NATIVE_MAKE_EXECUTABLE),
722	<	};
1080	>	// We are done with this interrupt
1081	>	--interrupt_depth;
1082	>	}
1083
1084		static void get_resource(void);
1085		static void get_1_resource(void);
#	Line 727 \| Line 1087 \| static void get_ind_resource(void);
1087		static void get_1_ind_resource(void);
1088		static void r_get_resource(void);
1089
1090	<	#define GPR(REG) current_cpu->gpr(REG)
1091	<
732	<	static void NativeOp(int selector)
1090	>	// Execute NATIVE_OP routine
1091	>	void sheepshaver_cpu::execute_native_op(uint32 selector)
1092		{
1093	+	#if EMUL_TIME_STATS
1094	+	native_exec_count++;
1095	+	const clock_t native_exec_start = clock();
1096	+	#endif
1097	+
1098		switch (selector) {
1099		case NATIVE_PATCH_NAME_REGISTRY:
1100		DoPatchNameRegistry();
#	Line 742 \| Line 1106 \| static void NativeOp(int selector)
1106		VideoVBL();
1107		break;
1108		case NATIVE_VIDEO_DO_DRIVER_IO:
1109	<	GPR(3) = (int32)(int16)VideoDoDriverIO((void )GPR(3), (void )GPR(4),
746	<	(void *)GPR(5), GPR(6), GPR(7));
1109	>	gpr(3) = (int32)(int16)VideoDoDriverIO(gpr(3), gpr(4), gpr(5), gpr(6), gpr(7));
1110		break;
1111	<	case NATIVE_GET_RESOURCE:
1112	<	get_resource();
1111	>	#ifdef WORDS_BIGENDIAN
1112	>	case NATIVE_ETHER_IRQ:
1113	>	EtherIRQ();
1114		break;
1115	<	case NATIVE_GET_1_RESOURCE:
1116	<	get_1_resource();
1115	>	case NATIVE_ETHER_INIT:
1116	>	gpr(3) = InitStreamModule((void *)gpr(3));
1117		break;
1118	<	case NATIVE_GET_IND_RESOURCE:
1119	<	get_ind_resource();
1118	>	case NATIVE_ETHER_TERM:
1119	>	TerminateStreamModule();
1120		break;
1121	<	case NATIVE_GET_1_IND_RESOURCE:
1122	<	get_1_ind_resource();
1121	>	case NATIVE_ETHER_OPEN:
1122	>	gpr(3) = ether_open((queue_t )gpr(3), (void )gpr(4), gpr(5), gpr(6), (void*)gpr(7));
1123	>	break;
1124	>	case NATIVE_ETHER_CLOSE:
1125	>	gpr(3) = ether_close((queue_t )gpr(3), gpr(4), (void )gpr(5));
1126	>	break;
1127	>	case NATIVE_ETHER_WPUT:
1128	>	gpr(3) = ether_wput((queue_t )gpr(3), (mblk_t )gpr(4));
1129	>	break;
1130	>	case NATIVE_ETHER_RSRV:
1131	>	gpr(3) = ether_rsrv((queue_t *)gpr(3));
1132		break;
1133	<	case NATIVE_R_GET_RESOURCE:
1134	<	r_get_resource();
1133	>	#else
1134	>	case NATIVE_ETHER_INIT:
1135	>	// FIXME: needs more complicated thunks
1136	>	gpr(3) = false;
1137	>	break;
1138	>	#endif
1139	>	case NATIVE_SYNC_HOOK:
1140	>	gpr(3) = NQD_sync_hook(gpr(3));
1141	>	break;
1142	>	case NATIVE_BITBLT_HOOK:
1143	>	gpr(3) = NQD_bitblt_hook(gpr(3));
1144	>	break;
1145	>	case NATIVE_BITBLT:
1146	>	NQD_bitblt(gpr(3));
1147	>	break;
1148	>	case NATIVE_FILLRECT_HOOK:
1149	>	gpr(3) = NQD_fillrect_hook(gpr(3));
1150	>	break;
1151	>	case NATIVE_INVRECT:
1152	>	NQD_invrect(gpr(3));
1153	>	break;
1154	>	case NATIVE_FILLRECT:
1155	>	NQD_fillrect(gpr(3));
1156		break;
1157		case NATIVE_SERIAL_NOTHING:
1158		case NATIVE_SERIAL_OPEN:
#	Line 777 \| Line 1171 \| static void NativeOp(int selector)
1171		SerialStatus,
1172		SerialClose
1173		};
1174	<	GPR(3) = serial_callbacks[selector - NATIVE_SERIAL_NOTHING](GPR(3), GPR(4));
1174	>	gpr(3) = serial_callbacks[selector - NATIVE_SERIAL_NOTHING](gpr(3), gpr(4));
1175		break;
1176		}
1177	<	case NATIVE_DISABLE_INTERRUPT:
1178	<	DisableInterrupt();
1179	<	break;
1180	<	case NATIVE_ENABLE_INTERRUPT:
1181	<	EnableInterrupt();
1177	>	case NATIVE_GET_RESOURCE:
1178	>	case NATIVE_GET_1_RESOURCE:
1179	>	case NATIVE_GET_IND_RESOURCE:
1180	>	case NATIVE_GET_1_IND_RESOURCE:
1181	>	case NATIVE_R_GET_RESOURCE: {
1182	>	typedef void (*GetResourceCallback)(void);
1183	>	static const GetResourceCallback get_resource_callbacks[] = {
1184	>	::get_resource,
1185	>	::get_1_resource,
1186	>	::get_ind_resource,
1187	>	::get_1_ind_resource,
1188	>	::r_get_resource
1189	>	};
1190	>	get_resource_callbacks[selector - NATIVE_GET_RESOURCE]();
1191		break;
1192	+	}
1193		case NATIVE_MAKE_EXECUTABLE:
1194	<	MakeExecutable(0, (void *)GPR(4), GPR(5));
1194	>	MakeExecutable(0, gpr(4), gpr(5));
1195	>	break;
1196	>	case NATIVE_CHECK_LOAD_INVOC:
1197	>	check_load_invoc(gpr(3), gpr(4), gpr(5));
1198		break;
1199		default:
1200		printf("FATAL: NATIVE_OP called with bogus selector %d\n", selector);
1201		QuitEmulator();
1202		break;
1203		}
797	–	}
1204
1205	<	/*
1206	<	* Execute native subroutine (LR must contain return address)
1207	<	*/
802	<
803	<	void ExecuteNative(int selector)
804	<	{
805	<	uint32 tvect[2];
806	<	tvect[0] = tswap32(POWERPC_NATIVE_OP_FUNC(selector));
807	<	tvect[1] = 0; // Fake TVECT
808	<	RoutineDescriptor desc = BUILD_PPC_ROUTINE_DESCRIPTOR(0, tvect);
809	<	M68kRegisters r;
810	<	Execute68k((uint32)&desc, &r);
1205	>	#if EMUL_TIME_STATS
1206	>	native_exec_time += (clock() - native_exec_start);
1207	>	#endif
1208		}
1209
1210		/*
#	Line 818 \| Line 1215 \| void ExecuteNative(int selector)
1215
1216		void Execute68k(uint32 pc, M68kRegisters *r)
1217		{
1218	<	current_cpu->execute_68k(pc, r);
1218	>	ppc_cpu->execute_68k(pc, r);
1219		}
1220
1221		/*
#	Line 828 \| Line 1225 \| void Execute68k(uint32 pc, M68kRegisters
1225
1226		void Execute68kTrap(uint16 trap, M68kRegisters *r)
1227		{
1228	<	uint16 proc[2];
1229	<	proc[0] = htons(trap);
1230	<	proc[1] = htons(M68K_RTS);
1231	<	Execute68k((uint32)proc, r);
1228	>	SheepVar proc_var(4);
1229	>	uint32 proc = proc_var.addr();
1230	>	WriteMacInt16(proc, trap);
1231	>	WriteMacInt16(proc + 2, M68K_RTS);
1232	>	Execute68k(proc, r);
1233		}
1234
1235		/*
#	Line 840 \| Line 1238 \| void Execute68kTrap(uint16 trap, M68kReg
1238
1239		uint32 call_macos(uint32 tvect)
1240		{
1241	<	return current_cpu->execute_macos_code(tvect, 0, NULL);
1241	>	return ppc_cpu->execute_macos_code(tvect, 0, NULL);
1242		}
1243
1244		uint32 call_macos1(uint32 tvect, uint32 arg1)
1245		{
1246		const uint32 args[] = { arg1 };
1247	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1247	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1248		}
1249
1250		uint32 call_macos2(uint32 tvect, uint32 arg1, uint32 arg2)
1251		{
1252		const uint32 args[] = { arg1, arg2 };
1253	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1253	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1254		}
1255
1256		uint32 call_macos3(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3)
1257		{
1258		const uint32 args[] = { arg1, arg2, arg3 };
1259	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1259	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1260		}
1261
1262		uint32 call_macos4(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4)
1263		{
1264		const uint32 args[] = { arg1, arg2, arg3, arg4 };
1265	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1265	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1266		}
1267
1268		uint32 call_macos5(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4, uint32 arg5)
1269		{
1270		const uint32 args[] = { arg1, arg2, arg3, arg4, arg5 };
1271	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1271	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1272		}
1273
1274		uint32 call_macos6(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4, uint32 arg5, uint32 arg6)
1275		{
1276		const uint32 args[] = { arg1, arg2, arg3, arg4, arg5, arg6 };
1277	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1277	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1278		}
1279
1280		uint32 call_macos7(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4, uint32 arg5, uint32 arg6, uint32 arg7)
1281		{
1282		const uint32 args[] = { arg1, arg2, arg3, arg4, arg5, arg6, arg7 };
1283	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1283	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1284		}
1285
1286		/*
#	Line 891 \| Line 1289 \| uint32 call_macos7(uint32 tvect, uint32
1289
1290		void get_resource(void)
1291		{
1292	<	current_cpu->get_resource(ReadMacInt32(XLM_GET_RESOURCE));
1292	>	ppc_cpu->get_resource(ReadMacInt32(XLM_GET_RESOURCE));
1293		}
1294
1295		void get_1_resource(void)
1296		{
1297	<	current_cpu->get_resource(ReadMacInt32(XLM_GET_1_RESOURCE));
1297	>	ppc_cpu->get_resource(ReadMacInt32(XLM_GET_1_RESOURCE));
1298		}
1299
1300		void get_ind_resource(void)
1301		{
1302	<	current_cpu->get_resource(ReadMacInt32(XLM_GET_IND_RESOURCE));
1302	>	ppc_cpu->get_resource(ReadMacInt32(XLM_GET_IND_RESOURCE));
1303		}
1304
1305		void get_1_ind_resource(void)
1306		{
1307	<	current_cpu->get_resource(ReadMacInt32(XLM_GET_1_IND_RESOURCE));
1307	>	ppc_cpu->get_resource(ReadMacInt32(XLM_GET_1_IND_RESOURCE));
1308		}
1309
1310		void r_get_resource(void)
1311		{
1312	<	current_cpu->get_resource(ReadMacInt32(XLM_R_GET_RESOURCE));
1312	>	ppc_cpu->get_resource(ReadMacInt32(XLM_R_GET_RESOURCE));
1313		}

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing SheepShaver/src/kpx_cpu/sheepshaver_glue.cpp (file contents): Revision 1.11 by gbeauche, 2003-10-26T14:16:39Z vs. Revision 1.53 by gbeauche, 2004-11-22T22:04:38Z

Diff Legend

Comparing SheepShaver/src/kpx_cpu/sheepshaver_glue.cpp (file contents):
Revision 1.11 by gbeauche, 2003-10-26T14:16:39Z vs.
Revision 1.53 by gbeauche, 2004-11-22T22:04:38Z